Product Categories
Social Media
Home > News > Content
Analysis And Introduction Of Different Materials For Paper Tag
- Aug 21, 2017 -

      Self-adhesive materials by the surface is divided into paper stickers and film stickers label Two, paper tags are divided into: Heat transfer paper, coated paper, mirror, writing papers, cardboard, Kraft, and so on, these are familiar to people. Self-adhesive label Paper common film materials are PE, PP, PET, PVC, pp and PE mixture, synthetic paper, different materials have different characteristics and applications, most of the film materials can be processed into multi-color.Paper Tag
      PVC (PVC): There are two kinds of soft and hard, durability, tearing resistance, softness, chemical corrosion resistance is good, in electronics, machinery and batteries, outdoor stickers used a lot. However, temperature resistance and tensile resistance in general, affected by temperatures will appear a certain degree of contraction. Easy to rip when stretching. Limited by environmental protection, currently in the indoor use less and fewer. Synthetic paper (a kind of PP material): It looks like paper, Matt White, after two-way stretching treatment, material tenacity, good resistance to extrusion. At the same time have a good thermal transfer printing performance, material texture is hard, suitable for flat or hard surface. In electronic components, daily products on the application of more.Paper Tag
      Pet (Polyester): Excellent high temperature resistance, durability and tensile resistance, chemical corrosion resistance, high, there are a variety of colors, can do metal processing, transparent material transparency excellent. Material tensile deformation, it is difficult to tear, in the jitter will emit metal friction sound.       In electrical appliances, electric and mechanical equipment has a wide range of applications, can reflect a very good texture and strength. PP (PP): Two-way stretching with the machine, also known as Bopp, high hardness, good tensile resistance, not light transmittance, excellent durability, but temperature resistance generally, transparent materials have excellent transparency. PP material is applied on the surface of the bottle body which is very hard and will not be extruded. In the market, with glassine backing paper or pet substrate to meet the PP surface material, is to take into account the different levels of transparency requirements.Paper Tag
      PP and PE mixture (polyolefin): The machine for one-way tensile treatment, has a high tensile strength and tear resistance, low light transmittance, soft materials, resistance to extrusion. The material can be stretched to form a straight line in one direction and behaves very hard in the other direction. This kind of material set softness and stiffness in one, in the direction of the machine has a very good stiffness, the other side has a very good softness, in the labeling when the smooth, labeling after the good extrusion resistance. Paper Tag
      It is widely used in glasses care liquid and daily chemical products. PE (polyethylene): soft, good extrusion resistance, poor tensile resistance, white and transparent color, can do metal processing. Due to the good softness of PE, it is often used in the bottle body which is often extruded and easily deformed. But the PE material is too soft, need to increase the thickness by increasing the stiffness, 80~100μm thickness, often used as a large area of labeling materials.Paper Tag